Cixi Fly Pipe Equipment Co.,Ltd

Sockt weld Tee & Cross

Dimensions Socket weld Tees and Crosses – 3000 LBS – NPS 1/2 – 4 according to ASME B16.11

NPS	Socket Bore B	Depth Socket J	Bore diameter D	Socket wall thickness C	Body wall thickness G	Center to bottom of socket A
1/2	21.95 21.70	10	16.6 15	4.65 4.10	3.75	15.5
3/4	27.30 27.05	13	21.7 20.2	4.90 4.25	3.90	19.5
1	34.05 33.80	13	27.4 25.9	5.70 5.00	4.55	22
1 ¼	42.80 42.55	13	35.8 34.3	6.05 5.30	4.85	27
1 ½	48.90 48.65	13	41.7 40.1	6.35 5.55	5.10	32
2	61.35 61.10	16	53.5 51.7	6.95 6.05	5.55	38
2 ½	74.20 73.80	16	64.2 61.2	8.75 7.65	7.00	41.5
3	90.15 89.80	16	79.5 46.4	9.50 8.30	7.60	57.5
4	115.80 115.45	19	103.8 100.7	10.70 9.35	8.55	66.5

Dimensions Socket weld Tees and Crosses – 6000 LBS – NPS 1/2 – 2 according to ASME B16.11

NPS	Socket Bore B	Depth Socket J	Bore diameter D	Socket wall thickness C	Body wall thickness G	Center to bottom of socket A
1/2	21.95 21.70	10	12.5 11	5.95 5.20	4.80	19.5
3/4	27.30 27.05	13	16.3 14.8	6.95 6.05	5.55	22.5
1	34.05 33.80	13	21.5 19.9	7.90 6.95	6.35	27
1 ¼	42.80 42.55	13	30.2 28.7	7.90 6.95	6.35	32
1 ½	48.90 48.65	13	34.7 33.2	8.90 7.80	7.15	38
2	61.35 61.10	16	43.6 42.1	10.90 9.50	8.75	41

scoket weld tee and cross

General notes:

Dimensions are in millimeters unless otherwise indicated.
Socket Bore (B) – Maximum and minimum dimensions.
Bore Diameter (D) – Maximum and minimum dimensions.
Socket wall thickness – (C) – Average of Socket wall thickness.
Dimensional tolerances center to bottom of socket – (A) NPS 1/2 and NPS 3/4 = +/- 1.5 mm NPS 1 to NPS 2 = +/- 2 mm NPS 2 ½ to NPS 4 = +/- 2.5 mm