Socket weld Elbows 90°/45°
Dimensions Socket weld Elbows 90°/45° – 3000 LBS – NPS 1/2 – 4 according to ASME B16.11
NPS | Socket Bore B | Depth Socket J | Bore diameter D | Socket wall thickness C | Body wall thickness G | Center to bottom of socket A | |
90° | 45° | ||||||
1/2 | 21.95 21.70 | 10 | 16.6 15 | 4.65 4.10 | 3.75 | 15.5 | 11.5 |
3/4 | 27.30 27.05 | 13 | 21.7 20.2 | 4.90 4.25 | 3.90 | 19.5 | 12.5 |
1 | 34.05 33.80 | 13 | 27.4 25.9 | 5.70 5.00 | 4.55 | 22 | 14 |
1 ¼ | 42.80 42.55 | 13 | 35.8 34.3 | 6.05 5.30 | 4.85 | 27 | 17 |
1 ½ | 48.90 48.65 | 13 | 41.7 40.1 | 6.35 5.55 | 5.10 | 32 | 21 |
2 | 61.35 61.10 | 16 | 53.5 51.7 | 6.95 6.05 | 5.55 | 38 | 25 |
2 ½ | 74.20 73.80 | 16 | 64.2 61.2 | 8.75 7.65 | 7.00 | 41.5 | 29 |
3 | 90.15 89.80 | 16 | 79.5 46.4 | 9.50 8.30 | 7.60 | 57.5 | 31.5 |
4 | 115.80 115.45 | 19 | 103.8 100.7 | 10.70 9.35 | 8.55 | 66.5 | 41.5 |
Dimensions Socket weld Elbows 90°/45° – 6000 LBS – NPS 1/2 – 2 according to ASME B16.11
NPS | Socket Bore B | Depth Socket J | Bore diameter D | Socket wall thickness C | Body wall thickness G | Center to bottom of socket A | |
90° | 45° | ||||||
1/2 | 21.95 21.70 | 10 | 12.5 11 | 5.95 5.20 | 4.80 | 19.5 | 12.5 |
3/4 | 27.30 27.05 | 13 | 16.3 14.8 | 6.95 6.05 | 5.55 | 22.5 | 14.5 |
1 | 34.05 33.80 | 13 | 21.5 19.9 | 7.90 6.95 | 6.35 | 27 | 17 |
1 ¼ | 42.80 42.55 | 13 | 30.2 28.7 | 7.90 6.95 | 6.35 | 32 | 21 |
1 ½ | 48.90 48.65 | 13 | 34.7 33.2 | 8.90 7.80 | 7.15 | 38 | 25 |
2 | 61.35 61.10 | 16 | 43.6 42.1 | 10.90 9.50 | 8.75 | 41 | 29 |
General notes:
- Dimensions are in millimeters unless otherwise indicated.
- Socket Bore (B) – Maximum and minimum dimensions.
- Bore Diameter (D) – Maximum and minimum dimensions.
- Socket wall thickness – (C) – Average of Socket wall thickness.
- Dimensional tolerances center to bottom of socket – (A) NPS 1/2 and NPS 3/4 = +/- 1.5 mm NPS 1 to NPS 2 = +/- 2 mm NPS 2½ to NPS 4 = +/- 2.5 mm