JIS Seamless Pipes
Japanese Industrial Standards (JIS) developed by the organization apply to a wide variety of industrial services and technologies such as automobiles, metallurgy, ships and medical equipment.
Seamless steel pipe is alos called CDS pipes (Cold drawn seamless pipe). It’s is used widely in maching parts, shafts, bearings, cylinders having strength of 75000 PSD tensile. It is a solid carbon steel rod which is pushed on to the mandrel to form the shape of tube. It is availabe in different sizes. The method for making cold-drawn seamless pipes involves taking a round “billet” or bar of steel and boring it in the center, turning it, cutting it, heating it to make it more pliable, then “drawing” it (extruding or pulling it) to make it a longer and thinner tube.
JIS seamless pipe according to alloy, stainless steel or carbon. It tests steel’s properties, hardness, resistance to corrosion, pitting, heat treating processes and others. The results are listed in a main JIS steel grade for steel pipe as below.
Range of JIS standards
JIS G3429Steel grade:STH38, STH55, STH67 Application: Seamless Steel Tubes in High Pressure Gas Cylinder JIS G3439Steel grade: STO-G, STO-H, STO-J, STO-N, STO-C, STO-D, STO-E Application: Seamless Steel Oil Well, Casing, Tubing and Drill Pipe JIS G3441Steel grade:SCr 420TK, SCM415TK, SCM418TK, SCM420TK, SCM430TK, SCM435TK, SCM440TK Application:Alloy Steel Tubes for General Structural Purpose JIS G3444Steel grade: STK 30, STK 41, STK 50, STK 51, STK 55 Application: Carbon Steel Tubes for General Structural Purpose Dimension Range: 21.7-1016.0 mm JIS G3445Steel grade: STKM11A,STKM12A, STKM12B, STKM12C, STKM13A, STKM13B, STKM13C, STKMI4A, STKM14B, STKM14C, STKM15A, STKM18C, STKM16A, STKM18C, STKM17A, STKM17C, STKM18A, STKM18B, STKM18C, STKM19A, STKM19C, STKM20A Application: Carbon Steel Tubes for Machine Structural Purposes JIS G3454 >>Steel grade: STPG 38, STPG 42 Application: Carbon Steel Pipes for Pressure Service Dimension Range: 10.5-660.4 mm JIS G3455Steel grade: STS 38, STS 42, STS 49 Application: Carbon Steel Pipes for High Pressure Service Dimension Range: 10.5-660.4 mm JIS G3456Steel grade: STPT 38, STPT 42, STPT 49 Application: Carbon Steel Pipes for High Temperature Service Dimension Range:10.5-660.4 mm |
JIS G3458Steel grade:STPA 12, STPA 20, STPA 22, STPA 23, STPA 24, STPA 25, STPA 26 Application: Alloy Steel Pipes for Service Dimension Range:10.5-660.4 mm JIS G3460Steel grade:STPL 39, STPL 46, STPL 70 Application: Steel Pipes for Low Temperature Service Dimension Range:10.5-660.4 mm JIS G3461Steel grade:STB 35, STB 42, STB 52 Application: Carbon Steel Boiler and Heat Exchanger Tubes Dimension Range:15.9-139.8 mm JIS G3462Steel grade: STBAl2, STBAM, STBA20, STBA22, STBA23, STBA24, STBA25, STEA26 Application:Alloy Steel Boiler and Heat Exchanger Tubes Dimension Range: 15.9-139.8 mm JIS G3464Steel grade: STBL 39, STBL46, STBL 70 Application: Steel Heat Exchanger Tubes for Low Temperature Service Dimension Range: 15.9-139.8 mm JIS G3465Steel grade: STM-055, STM-C65, STM-R60, STM-1170, STM-1180, STM-R85 Application: Seamless Steel Tubes for Drilling Dimension Range: Casing: 43-142mm / Hollow Pipes: 34-180mm / Drilling:33.5-50mm JIS G3467Steel grade: STF 42, STFAl2, STFA22, STFA23, 5TFA24, STFA23, STFA26 Application:Steel Tubes for Fired Heater Dimension Range:60.5-267.4mm |
JIS seamless pipe testing covers many specifications, including alloy, size, toughness and composition. Those using steel products purchase the product that fulfills the requirements they need for what they are building.
Packing:
Packed in wooden crates, wrapped in plastic, and suitably protected for sea-worthly delivery or as requested. Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested. How to packing the seamless pipes?
Delivery:
Pipes are supplied in hexagonal bundles or round bundles tied with steel strip. Weight of bundle – up to 5000 kg upon request of customer. Each bundle is furnished with three tags.
Table 1: Tolerance on Outside Diameter in JIS G3441, G3444, G3445
Application | Tolerance on Outside Diameter (mm) | |
---|---|---|
JIS G3441 JIS G3444 JIS G3445 | =50 | ±0.5 |
>50 | ±1% | |
JIS G3441 JIS G3444 JIS G3445 | <50 | ±0.25 |
>50 | ±0.5% | |
JIS G3441 JIS G3445 | <25 | ±0.12 |
>25-40 | ±0.15 | |
>40-50 | ±0.18 | |
>5:.60 | ±0.20 | |
>60-70 | ±0.23 | |
>70-80 | ±0.25 | |
>80-90 | ±0.30 | |
>90-100 | ±0.40 | |
>100 | ±0.5% | |
JIS G3441 | <13 | ±0.25 |
>13-25 | ±0.40 | |
>25-40 | ±0.60 | |
>40-65 | ±0.80 | |
>65-90 | ±1.00 | |
>90-140 | ±1.20 | |
>140 | By agreement |
Table 2: Tolerance on Wall Thickness in JIS G3441, G3444, G3445
Application | Tolerance on Wall Thickness (mm) | |
---|---|---|
JIS G3441 JIS G3444 JIS G3445 | <=4 | -0.5,+0.6 |
>4 | -12.5%, +15% | |
JIS G3441 JIS G3444 JIS G3445 | <=3 | ±0 .3 |
>3 | ±10% | |
JIS G3441 JIS G3445 | <=2 | ±0.15 |
>2 | ±8% |
Table 3: Tolerance on Outside Diameter and Wall Thickness in JIS G3454
Application | Tolerance on Outside Diameter | Tolerance on Wall Thickness | ||
---|---|---|---|---|
Size | <40A | ±0.5mm | <=4mm | +0.6mm -0.5% |
>50A, <125A | ±1% | |||
Hot Rolled Seamless Pipes | 150A | ±1.6mm | >4mm | +15% -12.5% |
>200A | ±0.8% | |||
More than 350mm,the Tolerance is ±0.5% | ||||
Cold Drawn Seamless Pipes and Electric Resistant Welded Pipes | <25A | ±0.3mm | <=3mm | ±0.3mm |
>32A | ±0.8% | >3mm | ±10% | |
But more than 350mm, the Tolerance is ±0.5% |
Table 4: Tolerance on Outside Diameter and Wall Thickness in JIS G3455, G3456, G3458, G3460
Application | Tolerance on Outside Diameter | Tolerance on Wall Thickness | ||
---|---|---|---|---|
Hot Rolled Seamless Pipes | <=50mm | ±0.5mm | <=4mm | ±0.5mm |
>50-160mm | ±1% | |||
>160-200mm | ±1.6mm | >4mm | ±12.5% | |
>200mm | ±0.8% | |||
More that 350mm, the Tolerance is ±0.5% | ||||
Cold Drawn Seamless Pipes and Electric Resistant Welded Pipes | <=40mm | ±0.3mm | <=2mm | ±0.2mm |
>40mm | ±0.8% | >2mm | ±10% | |
More than 350 mm the Tolerance is ±0.5% |
Table 5: Tolerance on Outside Diameter in JIS G3461, G3462, G3464
Outside Diameter | Tolerance on Outside Diameter | ||||
---|---|---|---|---|---|
Hot Rolled Seamless Pipes | Seamless Pipes Through Quench and Normalized | Cold Drawn Seamless Pipes throng, the Hot Treatment Except Quench and Normalized | Electric Welded Pipes Except Cold Drawn | Cold Drawn Electric Welded Pipes | |
mm | |||||
<=25 | +0.4 -0.8 | ±0.25 | ±0.10 | ±0.15 | ±0.10 |
>25.40 | ±0.25 | ±0.15 | ±0.20 | ±0.15 | |
>40-50 | ±0.25 | ±0.20 | ±0.25 | ±0.20 | |
>50.60 | ±0.25 | ±0.25 | ±0.30 | ±0.25 | |
>60-80 | ±0.30 | ±0.30 | ±0.40 | ±0.30 | |
>80.100 | ±0.40 | ±0.40 | -0.60,+0.40 | ±0.40 | |
>100-120 | +0.4 -1.2 | -0.60,+0.40 | -0.60,+0.40 | -0.80,+0.40 | -0.60,+0.40 |
>120-160 | -0.80,+0.40 | -0.80,+0.40 | -1.00,+0.40 | -0.80,+0.40 | |
>160-200 | -1.8,+0.4 | -1.20,+0.40 | -1.20,+0.40 | -1.20,+0.40 | -1.20,+0.40 |
>200 | -2.4,+0.4 | -1.60,+0.40 | -1.60,+0.40 | -1.60,+0.40 | -1.60,+0.40 |
Table 6: Tolerance on Wall Thickness in JIS G3461, G3462, G3464
Wall Thickness (mm) | Hot Rolled Seamless Pipe | Cold Drawn Seamless Pipe | Electric Welded Pipe | |||
---|---|---|---|---|---|---|
Outside Diameter, mm | Outside Diameter, mm | Outside Diameter, mm | ||||
<=100 | >100 | <=40 | >40 | <=40 | >40 | |
(%) | ||||||
<=2 | — | — | -0,+0.4mm | +22 -0 | -0,+0.3mm | +18 0 |
>2-2.4 | -0,+40 | — | +20 -,0 | +18 -0 | ||
>2.4-3.8 | -0,+35 | -0,+35 | ||||
>3.8-4.6 | -0,+23 | -0,+33 | ||||
>4.6 | -0,+28 | -0,+28 |
Table 7: Tolerance on the Length in JIS G3461, G3462, G3464
Item | Tolerance an Length | |
---|---|---|
OD<50mm | <7m | -0, +7mm |
>=7m | Every 3m increase in length, the plus tolerance be increased by 3mm with a maximum of 15mm | |
OD>=50mm | <7m | -0, +10mm |
>=7m | Every 3m increase in length, the plus tolerance be increased by 3mm with a maximum of 15mm | |
OD: Outside Diameter |
Table 8: Tolerance on Outside Diameter in JIS G3465
Application | Tolerance on Outside Diameter (mm) | |
---|---|---|
Hot Rolled | <=50 | ±0.5 |
>50 | ±1% | |
Cold Drawn | <=40 | ±0.2 |
>40 | ±0.5% |